Lexus GS300 Drift Block RCA
These blocks are designed for those of you looking for more steering angle but retain the stock ball joints with the added bonus of it being a 1" or 25mm RCA block. An at home modification is needed to use these blocks. YOU MUST CUT THE STOCK TIE ROD LOCATION OFF YOUR BALL JOINTS. We use a 4.5" grinder with a cutting wheel to do so then clean the edges with a sanding disk on the same grinder. Allen head bolts are provided and should be torqued down to 90 ft/lbs. We suggest purchasing new stock replacement ball joints when installing as they are readily available online. Steering increase is about 10 deg of angle on both wheels. These blocks will make your steering feel quick and best used with the Battle Version inner tie rods with 5mm spacers for more angle.