Battle Version

Shopping Cart

Your shopping cart is empty

Visit the shop

Toyota Supra MKIII Rear Adjustable Sway Bar End Links

Battle Version’s 3 piece rear adjustable sway bar end links are self-lubricating Teflon injected bearings for better quality.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

 

$120.00Price:
Loading Updating cart…

SC300/400 DUAL CALIPER BRACKETS

The dual rear caliper brackets are an easier way to add a set of stock calipers (calipers and brake lines not included) to your sc300/400 for those who are looking to better your e-brake power. Must remove some material on the upright for the install. Pictures for reference. You can also shave a little off the bracket.

Caution… The SC300 calipers and rotors are a different size than the SC400 which uses a larger diameter rotor.

These brackets now come without coating (also lower priced as well). We have found that the stock brake calipers try to twist the bracket and it is better to weld these in place after bolting them on and lining up the calipers. Leaving the brackets uncoated makes it easier to do this modification if necessary.

Comes as a pair. (with brackets, bolts and spacers)

Price does not include shipping or tax if shipping to California.

ON SALE!!!

Price: $195.00
$120.00Price:
Loading Updating cart…

LEXUS GS300/400 INNER TIE ROD

Battle Version’s replacement inner tie rods are fully adjustable to your liking. Includes spacers to give almost 10 degrees of extra angle for your SC. Sold as Pairs(rack spacers not sold separately). Will fit with stock outer tie rods.

Price does not include shipping or tax if shipping to California.

$90.00Price:
Loading Updating cart…

FR-S / BRZ REAR TOE LINKS

Hand assembled, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to make your ride handle better.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Toyota Supra MKIV Rear Subframe Mounts

There may other ones available, but none do it right. Precision CNC cut from billet aircraft grade aluminum, these are designed to make your rear subframe solid.

With this version, you won’t have to burn your rubber off the subframe, simply unbolt the old bushings, and bolt this one back in. It’s a lot easier and faster for you to install.

Price does not include shipping or tax if shipping to California.

$375.00Price:
Loading Updating cart…

Lexus GS300 Rear Toe Links Gen1

So you picked up a first gen GS? Whether your car is VIP or has track duties, make sure to freshen up that old suspension and get maximum adjustability with our rear toe links.

Hand assembled, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of every day life- track or street.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus SC300/SC400 Front Subframe Spacers

There may other ones available, but none do it right. These add the rigidity Alex needs to thunder his Battle Version SC300 around the corners.
Precision CNC cut from billet aircraft grade aluminum, these are designed to make your rear subframe solid.

—– MUST WATCH BEFORE PURCHASE!!!!—–

Price does not include shipping or tax if shipping to California.

$120.00Price:
Loading Updating cart…

BMW 3 SERIES E36 REAR CAMBER LINKS

Get the correct angle you need for the track or on the street. These arms will help you adjust the camber you need for the track.

Hand assembled and track ready, These links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Toyota Supra MKIV Front Subframe Spacers

Don’t put inferior parts on your Supra. Make it a track demon, feel the power. These subframe spacers give you a more direct feel of the road. Precision CNC cut from billet aircraft grade aluminum, these are a necessity when taking your car to the track.

—– MUST WATCH BEFORE PURCHASE!!!!—–

Price does not include shipping or tax if shipping to California.

$120.00Price:
Loading Updating cart…

Lexus GS300 GEN1 Front Subframe Spacers

These subframe spacers give you a more direct feel of the road. Precision CNC cut from billet aircraft grade aluminum.

—– MUST WATCH BEFORE PURCHASE!!!!—–

Price does not include shipping or tax if shipping to California.

$120.00Price:
Loading Updating cart…

Lexus GS300 Solid Differential Bushings (REAR) GEN1

Factory rubber differential bushings were never designed with performance in mind.  With these solid aluminum anodized differential bushings (2 pcs. total) your differential will smile knowing its putting all the power to the ground.  These parts replace the horizontal (rear) differential bushings; we also manufacture the vertical (front) solid differential bushings as well as subframe bushings!

Price does not include shipping or tax if shipping to California.

$150.00Price:
Loading Updating cart…

BMW 3 Series E46 Rear Camber Links

These arms will help you adjust the camber you need for the track. Simple design allows us to give you a high quality part at an affordable price.

Hand assembled and made track ready, these links use aircraft grade billet aluminum, and come standard with FK 3 Piece Alloy Series Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus GS300 GEN1 Rear Subframe Spacers (REAR)

These subframe spacers give you a more direct feel of the road. Precision CNC cut from billet aircraft grade aluminum.

http://www.youtube.com/watch?v=DGsnWSVdLgQ

Price does not include shipping or tax if shipping to California.

$120.00Price:
Loading Updating cart…

Lexus GS300 Solid Differential Bushings (Front) GEN1

Factory rubber differential bushings were never designed with performance in mind.  With these solid aluminum anodized 2 piece differential bushings (4 pcs. total) your differential will smile knowing its putting all the power to the ground.  These parts replace the vertical (front) differential bushings; we also manufacture the horizontal (rear) solid differential bushings as well as subframe bushings!

Price does not include shipping or tax if shipping to California.

$120.00Price:
Loading Updating cart…

Lexus GS300/GS400 Solid Differential Bushings (Rear)

Factory rubber differential bushings were never designed with performance in mind.  With these solid aluminum anodized differential bushings (2 pcs. total) your differential will smile knowing its putting all the power to the ground.  These parts replace the horizontal (rear) differential bushings; we also manufacture the vertical (front) solid differential bushings as well as subframe bushings!

Price does not include shipping or tax if shipping to California.

$150.00Price:
Loading Updating cart…

LEXUS GS300/GS400 OUTER TIE ROD ENDS

Battle Version’s high quality GS300 and GS400 outer tie rod ends use aircraft grade billet aluminum, and contain self-lubricating Teflon injected bearings. These components will also fit with OEM inner tie rods. Do not use with stock size wheels. Please torque tapered bolt to 50 ftlbs and use supplied cotter pin. Comes with additional spacers for bump steer adjustment.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

LEXUS GS300/400 Rear Subframe Spacers

Aluminum Subframe Spacers for your Gs300/400 to replace the old rubber bushings for solid quality.

Price does not include shipping or tax if shipping to California.

$240.00Price:
Loading Updating cart…

Toyota Supra MKIII Front Adjustable Sway Bar End Links

Battle Version’s 3 piece rear adjustable sway bar end links are self-lubricating Teflon injected bearings for better quality.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$120.00Price:
Loading Updating cart…

TOYOTA AE86 OUTER TIE ROD ENDS

Battle Version AE86 outer tie rods with our signature Alloy series rod ends with aircraft grade aluminum tubes. Also comes with 5mm spacers to use on your inner tie rods for added steering angle. Don’t believe Ebay, those on there are not our parts and 5mm is about all you need if you already have a manual rack. We suggest using oem style inner tie rods with this kit.

Ask for our extended version if your running extended lower control arms.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Subaru Impreza WRX/STI Rear Adjustable Sway Bar End Links

Battle Version signature chromoly teflon injected rod ends make your sway bar work smoother with no harsh ride. Makes the set really stand out.

Price does not include shipping or tax if shipping to California.

$150.00Price:
Loading Updating cart…

TOYOTA SUPRA MKIII OUTER TIE ROD ENDS

Battle Version’s outer tie rods are high quality and use aircraft grade billet aluminum, and contain self-lubricating Alloy Teflon injected bearings. Will fit with OEM inner tie rods.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

BMW 3 Series E46 Rear Subframe Spacers

After purchasing an E46. we took the car out to the mountains a few times and found out that the body started to crack around the subframe mounts. We ended up welding round washers to prevent more damage to the body and also came up with this new design of subframe mounts that are unlike any other. They are designed this way to spread the load of the suspension out as much as possible over the body area while also being easier to install.

Price does not include shipping or tax if shipping to California.

ON SALE!!!

Price: $240.00
$195.00Price:
Loading Updating cart…

LEXUS SC300/SC400 FRONT UPPER CONTROL ARMS

Newly added to the Battle Version product line up, our SC300/SC400 FUCAs are designed to allow adjustments to front camber for more precise alignment. We hand make and assemble every arm. The use of our 2- piece self lubricating Teflon injected rod ends will insure maximum durability and long life in extreme use.

Price does not include shipping or tax if shipping to California.

$495.00Price:
Loading Updating cart…

Toyota Supra MKIV FRONT UPPER CONTROL ARMS

Newly added to the Battle Version product line up, our SC300/SC400 FUCAs are designed to allow adjustments to front camber for more precise alignment. We hand make and assemble every arm. The use of our 2- piece self lubricating Teflon injected rod ends will insure maximum durability and long life in extreme use.

Price does not include shipping or tax if shipping to California.

$495.00Price:
Loading Updating cart…

Lexus GS350 Rear Toe Links

If you maxed out your toe adjustment or your rear toe links are trashed, then Battle Version’s rear toe links are for you!

These links use aircraft grade billet aluminum, and contain self-lubricating Teflon injected bearings. Hand assembled and ready for the street and track!

Those arms will be using the stock nut to tight it down.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus GS350 Rear Traction LinkS

Is your GS super low or do you tuck wide tires? The traction arms for your GS will let you set your car up the way you want and move the wheels back to the middle of your fender to get that right look. As always, we use CNC billet aluminum and premium Teflon- injected self lubricating rod ends to handle the abuse you put on your suspension — on or off the track.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus GS350 Rear Upper Forward and Rear Upper Rear

Since this car as 2 uppers, the Lexus GS350 Rear Upper Forward and the Lexus GS350 Rear Upper Rear must be replaced at the same time. The rear upper rear will be using the stock nut to tight it down.

Price does not include shipping or tax if shipping to California.

Rear Upper Forward:

Rear Upper Rear:

$390.00Price:
Loading Updating cart…

LEXUS IS300 OUTER TIE ROD ENDS

Battle Version’s high quality IS300 outer tie rod ends use aircraft grade billet aluminum, and contain self-lubricating Teflon injected bearings. These components will also fit with OEM inner tie rods. Do not use with stock size wheels. Please torque tapered bolt to 50 ftlbs and use supplied cotter pin. Comes with additional spacers for bump steer adjustment.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Nissan GTR Rear Camber Links

Fit those ultra wide rims, slam it, or get it ready for the track with Battle Version Rear Camber Links. These camber links will allow you to add or remove camber. For that VIP look, ask for camber over -10 and we will make them longer for you. Hand assembled and made track ready, these links use aircraft grade billet aluminum, and come standard with 3 Piece Alloy Series Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Nissan GTR Rear Toe Links

Hand assembled and made track ready, these links use aircraft grade billet aluminum, and come standard with 3 Piece Alloy Series Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Ask for VIP length to go with your camber links to get more than -10 and still be able to roll out the parking lot.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

BMW 3 Series E46 Rear Trailing Arm Spherical Bearings

The stock bushings wear out easily on our BMW. Save yourself the headache and pick up a pair of these trailing are bushing replacements which use chromoly spherical bearings that are known to outlast and out perform any other. The stock bushings are tapered and our design is also tapered and directional. These are made to fit tightly and best to put them in the freezer to shrink the size slightly before installing. Use the set screws to securely hold in place and torque them 10 to 14 ft/lbs.

ON SALE!!!

Price: $225.00
$195.00Price:
Loading Updating cart…

BMW 3 Series E36 Rear Trailing Arm Spherical Bushings

The stock bushings wear out easily on our BMW. Save yourself the headache and pick up a pair of these trailing are bushing replacements which use chromoly spherical bearings that are known to outlast and out perform any other. The stock bushings are tapered and our design is also tapered and directional. These are made to fit tightly and best to put them in the freezer to shrink the size slightly before installing. Use the set screws to securely hold in place and torque them 10 to 14 ft/lbs.

ON SALE!!!

Price: $225.00
$195.00Price:
Loading Updating cart…

Lexus GS300 Rear Traction Links Gen1

With the first generation GS300 becoming more affordable and with more people picking these up for drifting/VIP we decided to make some parts for you guys!
Our traction links use the same design as all our track parts. These links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of what ever you subject the GS to.

Price does not include shipping or tax if shipping to California.

 

$195.00Price:
Loading Updating cart…

Lexus GS300/GS400 Rear Toe LinkS VER.2

If you maxed out your toe adjustment or your rear toe links are trashed, then Battle Version’s rear toe links are for you!

These links use aircraft grade billet aluminum, and contain self-lubricating Teflon injected bearings. Hand assembled and ready for the street and track!

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus GS300/GS400 Rear Traction LinkS

Is your GS super low or do you tuck wide tires? The traction arms for your GS will let you set your car up the way you want and move the wheels back to the middle of your fender to get that right look. As always, we use CNC billet aluminum and premium Teflon- injected self lubricating rod ends to handle the abuse you put on your suspension — on or off the track.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus GS300/GS400 Solid Differential Bushings (Front)

Factory rubber differential bushings were never designed with performance in mind.  With these solid aluminum anodized 2 piece differential bushings (4 pcs. total) your differential will smile knowing its putting all the power to the ground.  These parts replace the vertical (front) differential bushings; we also manufacture the horizontal (rear) solid differential bushings.

Price does not include shipping or tax if shipping to California.

$120.00Price:
Loading Updating cart…

Lexus GS300/GS400 Solid Aluminum Rack Mounts

Does your GS feel like a luxury car; numb and unresponsive in the corners?
Start your project off right with a set of our Solid Aluminum Rack Mounts.
These bad boys will take the extra “slop” out of your steering, and let you feel the road.
Replaces Driver’s side only.

Price does not include shipping or tax if shipping to California.

$40.00Price:
Loading Updating cart…

Lexus SC300/SC400 Rear Toe Links

Want to tighten up your rear suspension and make it easy for track side adjustments? You need these.
Hand assembled and track ready, these high quality links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of  track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus SC300/SC400 Rear Traction Links

Battle Version’s SC300/400 traction links, as always, are hand assembled and track ready. These high quality links use aircraft grade billet aluminum, and Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

 

$195.00Price:
Loading Updating cart…

LEXUS SC300/SC400 OUTER TIE ROD ENDS

Battle Version’s high quality SC300 and SC400 outer tie rod ends use aircraft grade billet aluminum, and contain self-lubricating Teflon injected bearings. These components will also fit with OEM inner tie rods.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

LEXUS SC300/SC400 INNER TIE RODS

Battle Version’s replacement inner tie rods are fully adjustable to your liking. Includes spacers to give almost 10 degrees of extra angle for your SC. Sold as Pairs(rack spacers not sold separately). Will fit with stock outer tie rods.

Price does not include shipping or tax if shipping to California.

$90.00Price:
Loading Updating cart…

LEXUS SC300/SC400 FRONT ADJUSTABLE SWAY BAR END LINKS

Battle Version’s 3 piece front adjustable sway bar end links are constructed with high limit spacers that contain self-lubricating Teflon injected bearings for the highest quality.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$150.00Price:
Loading Updating cart…

LEXUS SC300/SC400 REAR ADJUSTABLE SWAY BAR END LINKS

Battle Version’s 3 piece rear adjustable sway bar end links are constructed using high limit spacers that contain self-lubricating Teflon injected bearings for highest quality.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$90.00Price:
Loading Updating cart…

Lexus SC300/SC400 Rear Subframe Spacers or Mounts

 

  • Lexus SC300/SC400 Rear Subframe Spacers:

There may other ones available, but none do it right. These add the rigidity Alex needs to thunder his Battle Version SC300 around the corners.
Precision CNC cut from billet aircraft grade aluminum, these are designed to make your rear subframe solid.

—– MUST WATCH BEFORE PURCHASE!!!!—–

There may other ones available, but none do it right. These add the rigidity Alex needs to thunder his Battle Version SC300 around the corners. Precision CNC cut from billet aircraft grade aluminum, these are designed to make your rear subframe solid.

 

 

  • Lexus SC300/SC400 Rear Subframe Mounts:

With this version, you won’t have to burn your rubber off the subframe, simply unbolt the old bushings, and bolt this one back in. It’s a lot easier and faster for you to install.

Price does not include shipping or tax if shipping to California.

from $120.00Price:
Loading Updating cart…

Lexus SC300/SC400 Solid Differential Bushings (Front)

Factory rubber differential bushings were never designed with performance in mind.  With these solid aluminum anodized 2 piece differential bushings (4 pcs. total) your differential will smile knowing its putting all the power to the ground.  These parts replace the vertical (front) differential bushings; we also manufacture the horizontal (rear) solid differential bushings as well as subframe bushings!

Price does not include shipping or tax if shipping to California.

$120.00Price:
Loading Updating cart…

Lexus SC300/SC400 Solid Differential Bushings (Rear)

Factory rubber differential bushings were never designed with performance in mind.  With these solid aluminum anodized differential bushings (2 pcs. total) your differential will smile knowing its putting all the power to the ground.  These parts replace the horizontal (rear) differential bushings; we also manufacture the vertical (front) solid differential bushings as well as subframe bushings!

Price does not include shipping or tax if shipping to California.

$150.00Price:
Loading Updating cart…

Lexus SC300/SC400 Solid Aluminum Rack Mounts

Does your SC feel like a luxury car; numb and unresponsive in the corners?
Start your project off right with a set of our Solid Aluminum Rack Mounts.
These bad boys will take the extra “slop” out of your steering, and let you feel the road.
Replaces Driver’s side only.
Be Sure to add some of our inner tie rods and rack spacers to get that “extra angle” if you are drifting!

Price does not include shipping or tax if shipping to California.

ON SALE!!!

Price: $40.00
$35.00Price:
Loading Updating cart…

LEXUS IS300 REAR TOE LINKS

The stock IS300 rear toe links have a limited amount of adjustment. Whether your IS is for the track or street, upgrade your old suspension and feel the results.

Battle Version’s rear toe links use Teflon-injected 3 piece rod ends and our centers are cut from billet aluminum.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus IS300 Rear Traction Links

Battle Version’s traction arms for your IS300 will let you set your vehicle up the way you want.

We use CNC billet aluminum and premium 3 piece Teflon-injected self lubricating rod ends to handle the abuse you put on your suspension.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus LS400 Rear Toe Links

Hand assembled, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to make your ride handle better.

Price does not include shipping or tax if shipping to California.

 

$195.00Price:
Loading Updating cart…

Lexus LS400 Rear Traction LinkS

Want to get that look but want something that will last past the parking lot. 3 piece alloy series rod ends come standard that are teflon injected for a long smooth life with no maintenance.

Price does not include shipping or tax if shipping to California.

 

$195.00Price:
Loading Updating cart…

Lexus LS400 REAR Camber LINKS

So you slammed your LS400? These arms will get you back on the right track. Set your camber where you want it, with our fully adjustable arms.

Hand assembled, these links use cold rolled DOM seamless steel tubing and contain Self-Lubricating Teflon injected bearings to make your ride handle better.

Price does not include shipping or tax if shipping to California.

ON SALE!!!

Price: $295.00
$230.00Price:
Loading Updating cart…

LEXUS SC430 REAR TOE LINKS

The stock SC430 rear toe links have a limited amount of adjustment. Whether your SC makes it to the track or is your daily driver, upgrade your old suspension and feel the results.

Battle Version’s rear toe links use Teflon-injected 3 piece rod ends and our centers are cut from billet aluminum.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus SC430 Rear Traction Arms

Battle Version’s traction arms for your SC430 will let you set your SC the way you want.

We use CNC billet aluminum and premium 3 piece Teflon- injected self lubricating rod ends to handle the abuse you put on your suspension.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus SC430 Front Solid Differential Bushings (Front)

Factory rubber differential bushings were never dehttp://battleversion.com/wp-admin/post.php?post=1036&action=editsigned with performance in mind.  With these solid aluminum anodized 2 piece differential bushings (4 pcs. total) your differential will smile knowing its putting all the power to the ground.  These parts replace the vertical (front) differential bushings; we also manufacture the horizontal (rear) solid differential bushings as well as subframe bushings!

Price does not include shipping or tax if shipping to California.

$120.00Price:
Loading Updating cart…

Lexus SC430 Solid Differential Bushings (Rear)

Factory rubber differential bushings were never designed with performance in mind.  With these solid aluminum anodized differential bushings (2 pcs. total) your differential will smile knowing its putting all the power to the ground.  These parts replace the horizontal (rear) differential bushings; we also manufacture the vertical (front) solid differential bushings as well as subframe bushings.

Price does not include shipping or tax if shipping to California.

$150.00Price:
Loading Updating cart…

Toyota Supra MKIV Rear Toe Links

The Supra’s suspension needs help when getting it aligned for the track. These toe links keep proper alignment for the track, helping you get in the winners circle.
Hand assembled and made track ready, These links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Toyota Supra MKIV Rear Traction Links

Whether at the strip or track get your car’s 2JZ power down to the track, where it’s needed. If you’ve bent one, don’t spend hundreds at the dealer for a OEM part, get these. Battle Version’s links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use. No rubber to wear out here.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Toyota Supra MKIV Outer Tie Rod Ends

Battle Version’s outer tie rods are high quality and use aircraft grade billet aluminum, and contain self-lubricating Alloy Teflon injected bearings. Will fit with OEM inner tie rods.

Comes with bumpsteer spacers.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

TOYOTA SUPRA MKIV INNER TIE RODS

Battle Version’s replacement inner tie rods are fully adjustable to your liking. Includes spacers to give almost 10 degrees of extra angle for your SUPRA. Sold as Pairs(rack spacers not sold separately). Will fit with stock outer tie rods.

Price does not include shipping or tax if shipping to California.

$90.00Price:
Loading Updating cart…

Toyota Supra MKIV Front Adjustable Sway Bar End Links

Battle Version’s 3 piece front adjustable sway bar end links are self-lubricating Teflon injected bearings for better quality.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$150.00Price:
Loading Updating cart…

Toyota Supra MKIV Rear Adjustable Sway Bar End Links

Battle Version’s 3 piece rear adjustable sway bar end links are self-lubricating Teflon injected bearings for better quality.

Hand assembled and track ready.

Price does not include shipping or tax if shipping to California.

$90.00Price:
Loading Updating cart…

Toyota Supra MKIV Solid Differential Bushings (Front)

Factory rubber differential bushings were never designed with performance in mind.  With these solid aluminum anodized 2 piece differential bushings (4 pcs. total) your differential will smile knowing its putting all the power to the ground.  These parts replace the vertical (front) differential bushings; we also manufacture the horizontal (rear) solid differential bushings as well as subframe bushings!

Price does not include shipping or tax if shipping to California.

$120.00Price:
Loading Updating cart…

Toyota Supra MKIV Solid Differential Bushings (Rear)

Factory rubber differential bushings were never designed with performance in mind.  With these solid aluminum anodized differential bushings (2 pcs. total) your differential will smile knowing its putting all the power to the ground.  These parts replace the horizontal (rear) differential bushings; we also manufacture the vertical (front) solid differential bushings as well as subframe bushings!

Price does not include shipping or tax if shipping to California.

$150.00Price:
Loading Updating cart…

Toyota Supra MKIV Solid Aluminum Rack Mounts

Does your Supra feel like a luxury car; numb and unresponsive in the corners?
Start your project off right with a set of our Solid Aluminum Rack Mounts.
These bad boys will take the extra “slop” out of your steering, and let you feel the road.
Replaces Driver’s side only.

Price does not include shipping or tax if shipping to California.

ON SALE!!!

Price: $40.00
$35.00Price:
Loading Updating cart…

FR-S / BRZ SUBFRAME SPACERS

Brand new to our parts line up, the BRZ/FRS delrin subframe spacers are designed for quick and easy installation yet they greatly help eliminate movement in the subframe.

Simply lower all 4 bolts of the subframe about an inch down. You will notice the subframe bolts are threaded pretty long. Once all 4 of them are loose, remove one bolt at a time and install the small rings on top of the bushing and the large rings under the factory washers. Tighten all 4 back up and torque to the proper specs.

Price does not include shipping or tax if shipping to California.

$40.00Price:
Loading Updating cart…

FR-S / BRZ SOLID STEERING RACK BUSHINGS

Brand new to our parts line up, the FR-S / BRZ solid aluminum steering rack spacers are a 4 piece kit that replace both stock rubber mounts to give you the ultimate feel of the road.  This is a clean and relatively easy process as the rack in the FR-S is a manual rack with no fluid line connections and is simple to remove.
As with all of our parts, these are designed and precision machined in California, USA.

Price does not include shipping or tax if shipping to California.

$40.00Price:
Loading Updating cart…

Toyota Supra MKIII Rear Toe Links

Battle Version’s rear toe links use 3 piece Teflon-injected rod ends. That means no lubricating and a long life, even under extreme racing conditions.

Price does not include shipping or tax if shipping to California.

$230.00Price:
Loading Updating cart…

Toyota Supra MKIII Rear Traction Links

Keep your MKIII SUPRA ON THE GROUND. These rear traction arms will help your 7M, 1J or 2J keep the traction on the strip or on the track.
Like always, Hand assembled and made track ready, These links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Toyota Supra MKIII Rear Camber Links

Get the correct angle you need for the track or on the street. These rear camber arms will help you fit those wide tires or get the camber you need for the track.
Like always, Hand assembled and made track ready, These links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

TOYOTA MR-S FRONT LOWER CONTROL ARMS

We have created a track-ready front suspension setup for the MR-S ZZW30 chassis. Our arms feature a super high limit ball joint so you can have increased tire angle and keep the car low. By creating a fully adjustable design, you can widen the front stance of your car. It features multiple positions for tension rod and sway bar attachments.

The FLCA set replaces the stock 1 piece control arm with a 2 piece design. This design incorporates adjustable caster and replaces the stock LCA bushings with a more wear resistant end.

Price does not include shipping or tax if shipping to California.

 

$875.00Price:
Loading Updating cart…

Toyota MR-S Rear Lower Control Arms

The Toyota MR is a formidable contender on the track. Fine tune your ride for the track or street with a set of our rear lower control arms.

Our arms are made from cnc-billet aluminum and utilize Teflon-injected bearings for worry free use.

Make sure to pick up the toe links and traction links for complete tuneability!

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Toyota MR-S Rear Toe LinkS

The Toyota MR is a formidable contender on the track. Fine tune your ride for the track or street with a set of our rear toe links. Unlike many other companies who sell Chinese parts, ours are made for the track. You can focus on driving with out worrying about your suspension falling apart.

Our arms are made from cnc-billet aluminum and utilize Teflon-injected bearings for worry free use.

Make sure to pick up the lower control arms and traction arms for complete tuneability!

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Toyota MR-S Rear Traction LinKS

The Toyota MR is a formidable contender on the track. Fine tune your ride for the track or street with a set of our rear traction links. Unlike many other companies who sell Chinese parts, ours are made for the track. You can focus on driving with out worrying about your suspension falling apart.

Our arms are made from cnc-billet aluminum and utilize Teflon-injected bearings for worry free use.

Make sure to pick up the toe links and lower control arms for complete tuneability!

Price does not include shipping or tax if shipping to California.

 

$195.00Price:
Loading Updating cart…

TOYOTA Cressida Rear Toe Links

Whether your car is VIP or has track duties, make sure to freshen up that old suspension and get maximum adjustability with our rear toe links.

Hand assembled, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of every day life- track or street.

Price does not include shipping or tax if shipping to California.

 

$195.00Price:
Loading Updating cart…

TOYOTA CRESSIDA REAR TRACTION LINKS

Battle Version’s rear toe links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of what ever you subject your Cressida to.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

TOYOTA CRESSIDA REAR CAMBER ARMS

This is a new addition to the Battle Version product line. These arms are designed for the purpose of adjusting rear camber on your MX83 and allow up to 1 1/2″ of adjustment. This set is fully adjustable on the car, and does not require being removed to set alignment.

Price does not include shipping or tax if shipping to California.

$230.00Price:
Loading Updating cart…

TOYOTA AE86 TENSION RODS

Our AE86 Tension Rod Kit is a must for anyone who is looking for a more direct feel out of their AE86. Our kit is designed to work with your stock lower control, to help eliminate any play in your front wheels and allows for a more adjustable, precise, alignment.

Hand assembled and made track ready, These links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$215.00Price:
Loading Updating cart…

Toyota AE86 4 Link SETUP (Race)

So you complain that your 86 doesn’t feel as tight as you want it to? It’s like skinny jeans on a fat man. It’s that tight.
Built for those of you who like that really tight feel. Made for Racing.
Like always, Hand assembled and made track ready, These links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.
Use with rear uppers.

We only have the rod ends/rod ends set up available at the moment.

Price does not include shipping or tax if shipping to California.

$355.00Price:
Loading Updating cart…

Toyota AE86 Traction Brackets (Weld on)

Bringing these brackets back from the dead but this time you must weld them on. Your 86 is a track monster. Put the power to the ground with a set of these AE86 TRACTION BRACKETS. Stop Hopping around and lay some rubber.

Weld on ONLY. Raw and uncoaded ready weld. Comes with the spacers and bolts to line them up and weld them in. Keep those spacers in there for added strength. 2 levels of adjustment for your high hp beast!

Price does not include shipping or tax if shipping to California.

ON SALE!!!

Price: $150.00
$127.50Price:
Loading Updating cart…

Mazda RX-7 FC Rear Toe Links

Born and bred for the track, these links use the BATTLE VERSION quality you have trusted for years.
Comes with tapered spacers for a direct bolt on.

Battle Version’s rear toe links use Teflon-injected 3 piece rod ends and our centers are cut from billet aluminum.

Price does not include shipping or tax if shipping to California.

$230.00Price:
Loading Updating cart…

Mazda RX-7 FC Rear Camber Link

This rear vertical camber link can be used to correct negative camber after lowering your FC, or add camber to fit those crazy deep dish wheels under the fenders,
Hand assembled and made track ready, Battle Version’s rear camber link uses Teflon-injected 3 piece rod ends and our centers are cut from billet aluminum.

Price does not include shipping or tax if shipping to California.

$100.00Price:
Loading Updating cart…

MAZDA RX-7 FD3S RLCA SET WITH TRAILING ARMS

After years of abuse, the bearings in the stock lower arms and trailing links start to get loose. With the Battle Version arms, you’re able to unbolt your stock links and replace them with Battle Version Signature Chromoly 3 piece teflon injected joints for long life and no noise. Camber adjustment becomes easy with a turnbuckle design. The trailing arms come with offset spacers for additional wheel clearance. Multiple mounting points on the lower control arms also allow you to move the trailing arms inward on the lower arms themselves for even greater wheel clearance.

Version 2 design with upgraded tubing and wider housings.

$750.00Price:
Loading Updating cart…

MAZDA RX-7 FD3S REAR TOE LINKS

Whether your FD makes it to the track or is your daily driver, upgrade your old suspension and feel the results.

We use Teflon-injected 3 piece rod ends and our centers are cut from billet aluminum. Hand built and assembled in the USA for quality.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Subaru Rear Lateral ArmS

Battle Version’s adjustable lateral suspension arms are made out of forged billet aluminum for strength. Then we added a set of our signature self-lubricating teflon injected bearings to keep you in control on the track, dirt or tarmac.

Price does not include shipping or tax if shipping to California.

 

Additional DescriptionMore Details

Fits:
GC/GD CHASSIS
FORESTER 01-06
IMPREZA 93-06
LEGACY 89-99
OUTBACK WAGON 97-98
INC WRX STI


$195.00Price:
Loading Updating cart…

Subaru Impreza STI Rear Control ArmS

Battle Version’s adjustable rear control arm is made for reliability and performance using a set of our signature self-lubricating teflon injected bearings to keep you in control whether your vehicle is a daily driver or weekend warrior.
– STI ONLY!

Price does not include shipping or tax if shipping to California.

ON SALE!!!

Additional DescriptionMore Details

Fits-
Impreza- WRX- STI ONLY 00-06
THIS IS FOR THE 1 MOUNTING TAB
PICTURE IS ACTUAL IMAGE, CHECK IF 1 OR 2 MOUNTING POINTS FOR SWAY BAR


Price: $325.00
$276.25Price:
Loading Updating cart…

Subaru IMPREZA WRX/STI Rear Trailing Arm

Battle Version’s adjustable rear trailing arms are hand built and assembled, using Self-Lubricating Teflon injected bearings to handle the rigors of every day life race life.

Price does not include shipping or tax if shipping to California.

ON SALE!!!

Additional DescriptionMore Details

Fits-
Impreza- 02-07 Including STi


Price: $325.00
$276.25Price:
Loading Updating cart…

Nissan S13 Rear Toe Arms

There are cheaper parts available, but if you’re headed to the track, do you want to risk it all on cheaper parts? Like always, hand assembled and made track ready, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use .
Trust the pro’s.

Price does not include shipping or tax if shipping to California.

 

$195.00Price:
Loading Updating cart…

NISSAN S13 Rear Traction Rods

So you say you have an Nissan?
Don’t sacrifice your camber and toe specs when lowering your vehicle.

Use these to adjust rear caster and bump steer independently of camber and toe.
Hand assembled and made track ready, these links use aircraft grade billet aluminum, and Teflon injected liners.
Don’t put inferior parts on when heading to the track or daily driving your vehicle.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Nissan S14 Front Tension Rods VER.3

Tension rods are a major component in your vehicle’s front suspension, and as a result they wear out quickly. Replace your worn factory pieces with these adjustable high quality parts from Battle Version!
Hand assembled and made track ready, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Nissan S14 Rear Toe Arms

Don’t risk it all on cheaper parts. Like always, hand assembled and made track ready, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.
Trust the pro’s.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

NISSAN S14 Rear Traction Rods

So you say you have an Nissan?
Don’t sacrifice your camber and toe specs when lowering your vehicle.

Use these to adjust rear caster and bump steer independently of camber and toe.
Hand assembled and made track ready, these links use aircraft grade billet aluminum, and Teflon injected liners.
Don’t put inferior parts on when heading to the track or daily driving your vehicle.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Nissan S15 Rear Toe Arms

Don’t risk it all on cheaper parts. Like always, hand assembled and made track ready, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.
Trust the pro’s.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

NISSAN S15 Rear Traction Rods

So you say you have an Nissan?
Don’t sacrifice your camber and toe specs when lowering your vehicle.

Use these to adjust rear caster and bump steer independently of camber and toe.
Hand assembled and made track ready, these links use aircraft grade billet aluminum, and Teflon injected liners.
Don’t put inferior parts on when heading to the track or daily driving your vehicle.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Nissan R32 Rear Toe Arms

There are cheaper parts available, but if you’re headed to the track, do you want to risk it all on cheaper parts? Like always, hand assembled and made track ready, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use .
Trust the pro’s.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

NISSAN R32 Rear Traction Rods

So you say you have an Nissan?
Don’t sacrifice your camber and toe specs when lowering your vehicle.

Use these to adjust rear caster and bump steer independently of camber and toe.
Hand assembled and made track ready, these links use aircraft grade billet aluminum, and Teflon injected liners.
Don’t put inferior parts on when heading to the track or daily driving your vehicle.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Nissan 300ZX Front Tension Rods Ver.3

A major part of the front suspension, these should be replaced ASAP when hitting the corners. Don”t let one break, leaving you stranded at the track or on the street. Towing your car is expensive!
Hand assembled and made track ready, These links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

NISSAN 300ZX Rear Traction Rods

So you say you have an Nissan?
Don’t sacrifice your camber and toe specs when lowering your vehicle.

Use these to adjust rear caster and bump steer independently of camber and toe.
Hand assembled and made track ready, these links use aircraft grade billet aluminum, and Teflon injected liners.
Don’t put inferior parts on when heading to the track or daily driving your vehicle.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Nissan 350Z/370z Rear Toe Links

So you got yourself a set of coil-overs and wonder how it’s all going to fit up?
These toe links are a MUST when running coil-overs but you also MUST be on coil overs since these arms will replace the stock spring buckets.
Hand assembled and made track ready, these links use aircraft grade billet aluminum, and come standard with 3 Piece Alloy Series Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

*Will not fit with stock suspension. Must run a coil over setup, meaning the springs must be moved from the original spring buckets onto the rear shocks.

Ask for VIP length to go with your camber links to get more than -10 and still be able to roll out the parking lot.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Nissan 350z/370z Rear Camber Links

Fit those ultra wide rims, slam it, or get it ready for the track with Battle Version Rear Camber Links. These camber links will allow you to add or remove camber. For that VIP look, ask for camber over -10 and we will make them longer for you. Hand assembled and made track ready, these links use aircraft grade billet aluminum, and come standard with 3 Piece Alloy Series Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Mini Cooper Rear Adjustable Control ArmS

Do you take your Cooper canyon carving? Is your Mini lowered? Then these arms are for you.  Our precision rear control arms are fully adjustable (for street or track) and feature Teflon-injected bearings for a for maintenance and worry free use.

These arms will fit in place of either Camber Links or Toe Links in the rear. For the ultimate in adjustability, 2 sets of arms will need to be purchased for a complete rear suspension.

-Comes as a pair (2 arms)

Remember to get your vehicle aligned when changing or modifying any suspension component.

Price does not include shipping or tax if shipping to California.

Additional DescriptionMore Details

Fits-
2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible
2007-2010 R56 MINI Cooper and Cooper S Hatchback
2008-2010 R55 MINI Cooper and Cooper S CLUBMAN
2009-2011 R57 MINI Cooper and Cooper S Convertible
2011 R60 MINI Cooper and Cooper S COUNTRYMAN
2012+ R58 Cooper and Cooper S COUPE


$225.00Price:
Loading Updating cart…

Mini Cooper Rear Adjustable Control Arm set

Battle Version’s rear control arms are fully adjustable (for street or track) and feature Teflon-injected bearings for a for maintenance and worry free use.

This will fit BOTH camber and toe. Buy this set when replacing all 4 arms, and save money!

Remember to get your vehicle aligned when changing or modifying any suspension component.

-Comes as two pair (4 arms)

Price does not include shipping or tax if shipping to California.

Additional DescriptionMore Details

Fits-
2002-2006 R50 MINI Cooper and R53 Cooper S Hatchback
2005-2008 R52 MINI Cooper and Cooper S Convertible
2007-2010 R56 MINI Cooper and Cooper S Hatchback
2008-2010 R55 MINI Cooper and Cooper S CLUBMAN
2009-2011 R57 MINI Cooper and Cooper S Convertible
2011 R60 MINI Cooper and Cooper S COUNTRYMAN
2012+ R58 Cooper and Cooper S COUPE


$425.00Price:
Loading Updating cart…

INFINITI Q45 Rear Toe Arms

These links use aircraft grade billet aluminum, and contain self-lubricating Teflon injected bearings to handle the rigors of what ever you do to your ride.

Hand assembled using the highest quality parts for Q45s on and off the track.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

INFINITI Q45 Rear Traction Rods

So you say you have an Infiniti?
Don”t sacrifice your camber and toe specs when lowering your vehicle.

Use these to adjust rear caster and bump steer independently of camber and toe.
Hand assembled and made track ready, these links use aircraft grade billet aluminum, and Teflon injected liners.
Don”t put inferior parts on when heading to the track or daily driving your vehicle.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

INFINITI Q45 Rear Toe Arms

These links use aircraft grade billet aluminum, and contain self-lubricating Teflon injected bearings to handle the rigors of what ever you do to your ride.

Hand assembled using the highest quality parts for Q45s on and off the track.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

INFINITI G35/G37 Rear Toe Links

So you got yourself a set of coil-overs and wonder how it’s all going to fit up?
These toe links are a MUST when running coil-overs. They replace the stock spring buckets and get your car ready for the track.

Like always, hand assembled and made track ready, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use or daily driving.

*Will not fit with stock suspension. Must run a coil over setup.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

INFINITI G35/G37 Rear Camber Links

Get more camber for your G35 or G37. Fit those ultra wide rims, slam it, or get it ready for the track with Battle Version.
Made adjustable, and stronger than the factory, these bad boys are needed when doing it right. These will allow you to add or take out camber.
Hand assembled and made track ready, these links use aircraft grade billet aluminum, and come standard with 3 Piece Alloy Series Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

INFINITI Q45 REAR UPPER CONTROL ARMS

Looking to get more negative camber out of the rear of your 02-06 Infiniti Q45? Want to fit low offset wheels inside the fender? Well, our new Q45 RUCA’s are designed for just that! Made to fit with no modification needed, and retains the oem rear sway bar. The use of our 3- piece self lubricating Teflon injected rod ends will insure maximum durability and long life in daily and extreme use. Version 2 has been upgraded to bearings on the inboard mounts.

Price does not include shipping or tax if shipping to California.

ON SALE!!!

Price: $575.00
$488.75Price:
Loading Updating cart…

Hyundai Genesis rear upper forward links

The new Genesis Coupe is a proven contender on the track, as seen in the 2011 FD season. Make your Genesis a contender with these track proven arms for the rear suspension of your Hyundai.
These high quality links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Use with our Rear Lower Forward Links for the ultimate in adjustment and handling!

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Hyundai Genesis Rear Toe Links

These high quality hand assembled links allow you to adjust the rear Toe on your Genesis to your specifications.
Like always, these links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Hyundai Genesis rear lower forward LINKS

These Battle Version links are hand assembled and made track ready. These high quality links use aircraft grade billet aluminum, and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Use with our Rear Upper Forward Links for the ultimate in adjustment and handling!

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Group Buys

So you want some Battle Version parts on your ride?

If we don’t currently offer the components you need, you can get a “group buy” together. Email us info@battleversion.com, and we’ll put the group buy up in our group buy section. When you get 10 people together and they all put 50% down(we will provide you an estimate), then we’ll get started on your part.  Need rear upper control arms for your Miata? Front control arms for your SC300/ Supra? Get the word out on the forums, and we’ll make the high quality battle version parts for you!

Easy steps.
1. Email us info@battleversion.com with your parts.
2. We will put it up in the group buy section, with estimated prices.
3. get 10-15 people to put 30-50% down. *** Get the word out on your forum or forums.
4. We will get started on your parts. From concept to final product in 1-3 months.
5. Once people pay we will ship them out. Pictures of updates will be found on facebook.

*** Due to the custom nature of these products, no refunds will be offered.

Examples of these would be:
Taka Aono, veteran Formula D driver, was looking for a more developed set of Front Lower Control Arms (FLCAs) for his Toyota AE86.

At the time no one offered anything for it, but Taka and several others believed it to be something that was very needed for the AE86 market and brought it to our attention. In just a few days he had gotten enough people to get behind the production cost, and within a few months time we had a fully developed and finished product for those eager 86 enthusiast.

 

Steve Kim, an avid VIP enthusiast, came to Battle version when trying to get the look and stance of his 02 Q45, just right. When we realized the only way that would be possible was by making a set of rear upper control arms for his car, he quickly gathered enough of his fellow enthusiasts to assist with production cost. Once we finished the arms up, we installed a set on Steve’s car, and were able to get the exact camber, and stance Steve was aiming for.

$0.00Price:

This product has sold out.

Lexus GS430 Rear Toe LinkS VER.2

If you maxed out your toe adjustment or your rear toe links are trashed, then Battle Version’s rear toe links are for you!

These links use aircraft grade billet aluminum, and contain self-lubricating Teflon injected bearings. Hand assembled and ready for the street and track!

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…

Lexus GS430 Rear Traction LinkS

After you lower your car down, the traction arms become too long and you will notice the wheels moving rearward.  By shortening the traction links you not only get a better look moving the wheels back to the center of your wheel arch but these arms will allow you to play with the rear upright angle which is important for correcting rear bumpsteer and upright angle. 3 piece alloy series rod ends come standard that are teflon injected for a long smooth life with no maintenance.

Price does not include shipping or tax if shipping to California.

$195.00Price:
Loading Updating cart…